Omnilab Upgrade

CPAP, BiPAP, and other sleep systems

Moderators: SCNVsleep, labman2

Omnilab Upgrade

Postby sleepadmin » Sat Jan 29, 2011 11:30 am

I'm working at a small (very) remote lab with Omnilabs. Can anyone help me out with the recent ASV firmware upgrade?
User avatar
sleepadmin
Admin
 
Posts: 1873
Joined: Thu Mar 13, 2003 2:30 pm

Postby linuxgeek » Sun Jan 30, 2011 6:10 am

If I remember correctly, you run their little firmware updater program while the unit is plugged into a serial port on the same computer. If you don't have a serial port, you can use a USB->serial converter. Respironics provides one that they like to use.

It's easiest to do it with a laptop cause you can go to each room and do the update. Although you can bring each Omnilab to the computer. I'm pretty sure you can't have the AOM in-between the Omnilab and the PC, which is how it is typically setup.
User avatar
linuxgeek
Senior Member
 
Posts: 1604
Joined: Wed Jan 23, 2008 11:29 pm

Postby sleepyjim » Sun Jan 30, 2011 8:28 am

my.respironics.com might have the firmware. A Respironics rep has to set up your login info, I think.
sleepyjim
Member
 
Posts: 79
Joined: Thu Mar 26, 2009 12:33 pm

Postby sleepadmin » Mon Jan 31, 2011 5:13 am

Yea... It's the program I'm looking for. It's not available for download. Hoping some kind soul would have a copy.
User avatar
sleepadmin
Admin
 
Posts: 1873
Joined: Thu Mar 13, 2003 2:30 pm

Postby linuxgeek » Mon Jan 31, 2011 5:56 am

If you ask, I think their rep will come in and do it for you.

And, if it's that remote, I think they'll provide it for you.

I didn't get a copy of it, since we hooked all of ours up to the rep's laptop.

If you don't get anywhere with your rep, I can ask.
User avatar
linuxgeek
Senior Member
 
Posts: 1604
Joined: Wed Jan 23, 2008 11:29 pm

Postby sleepadmin » Sat Mar 05, 2011 7:22 am

Here's the file required to update Omnilab to ver 1.1
Attachments
Upgrade Wizard.zip
(414.46 KiB) Downloaded 218 times
User avatar
sleepadmin
Admin
 
Posts: 1873
Joined: Thu Mar 13, 2003 2:30 pm


Return to Other Equipment

Who is online

Users browsing this forum: No registered users and 1 guest

cron